What Is Frequency-specific Microcurrent Therapy?
Frequency specific microcurrent therapy is a modern, non-invasive treatment that uses electrical currents to stimulate cells and tissues. It’s been used to help with healing from various conditions such as chronic pain, muscle or joint injuries, and even for those who want to lose weight.
The idea behind frequency specific microcurrent therapy is that it allows your body to use its natural healing processes more efficiently. This means it will heal faster and without any scarring. Frequency specific microcurrent therapy can also be used on healthy people who want to maintain their current level of wellness. In this article, you will learn more about this form of therapy, how it works, its health benefits and where you can find it near you.
What is frequency specific microcurrent?
A frequency-specific microcurrent is a form of electrical stimulation that is used to address localized pain and muscle spasm. The electrical stimulation comes from a small device that is placed on the skin and delivers a high-frequency pulsating electrical current. The device is usually self-contained and worn like a wristwatch. The device is placed on the affected muscle and delivers stimulation to it for 10 minutes, up to three times a day. Frequency-specific microcurrent might be helpful to people who suffer from chronic pain or who have injuries or other disorders that cause pain, such as fibromyalgia.
How does Frequency-specific microcurrent work?
Frequency-specific microcurrent is a low-energy, painless, natural therapy. It does not involve any use of drugs or surgery, so it is a good alternative for those who are not responding well to other treatments. This therapy has been used for many years to treat a wide variety of health issues. The therapy works by delivering a pulsed electrical current at a very specific frequency, which will then help to stimulate the body’s own natural healing response. This therapy is typically applied to the affected area for a period of 20-30 minutes, a few times a day.
The body’s own healing response is dependent on a number of factors, including the amount of energy and frequency delivered. The body has been designed to heal itself with minimal intervention, but it can only do this if it receives the correct type and amount of treatment. Therefore, frequency-specific microcurrent therapy is different for every person depending on their needs and condition. For example, one person may require more stimulation than another because their condition is more severe or they have recently had surgery.
The electrical pulses from FSM are very low energy and painless, so it does not cause any damage to the tissue.
The results of FSMT are often profound and can be experienced quickly. Patients experience relief from chronic pain, decreased inflammation, improved range of motion, and increased energy level.
Who Can Benefit from Frequency-Specific Microcurrent Therapy?
● Research shows that FSMT can ease a wide range of conditions including
● Pain from an injury or degenerative conditions
● Chronic pain due to arthritis, fibromyalgia, migraines
● Chronic muscular pain and spasms
● Scar tissue formation following surgery or injury
● Injury-related limitations in mobility due to muscle spasm or soft tissue damage
● Chronic inflammatory conditions
● Muscle weakness/fatigue
● Fibromyalgia, Parkinson’s, MS, ALS, and other neurological conditions
Fibroids and other reproductive or urinary conditions
Conditions that can be treated with frequency-specific microcurrent therapy
Fibromyalgia
Fibromyalgia is a chronic disorder that causes widespread muscle pain, fatigue, sleep problems, depression, and more. It affects nearly 5 million Americans every year. FSM therapy was developed to help treat fibromyalgia and other similar disorders.
Some people suffering from fibromyalgia have reported relief from their symptoms after receiving FSM treatments over a period of time.
Shingles
Shingles (herpes zoster) is a painful, blistering skin condition that occurs when the virus that causes chickenpox — varicella-zoster virus — becomes reactivated. It’s estimated that 1 million people get shingles every year in the United States, but you can help combat this condition if you receive frequency-specific microcurrent therapy for shingles.
Frequency-specific microcurrent therapy stimulates tissue regeneration in skin cells to promote faster healing. The increased blood flow in the area will also help heal your wounds faster. Because it increases the pain threshold, frequency specific microcurrent therapy for shingles can also decrease your brain’s sensitivity to pain and allow you to move more freely. This additional movement will help make recovery easier — without adding stress or strain on your body.
Burns
This therapy has been proven to be an effective treatment for burns. Burns often cause scar tissue, and this scar tissue can make the patient feel pain. Frequency specific microcurrent therapy reduces the amount of scar tissue in a burn patient’s body by breaking down the scar tissue into very small particles so the body can remove them. Over time, the therapy treatments will reduce the amount of scarring in a burn patient’s body, and patients will experience less pain.
Kidney stones
There’s no denying that kidney stones are an uncomfortable experience. When they form, they can cause intense pain in your back, abdomen or groin area. The pain often radiates down the legs and can be accompanied by nausea, vomiting, fever, and sweating. Kidney stones are most commonly made up of calcium oxalate or calcium phosphate, but they can also include uric acid or cystine. Calcium oxalate stones are the most common type of stone in adults, accounting for about 80% of cases and 90% in children. The type of stone you have depends on many factors, including your age, diet, and ethnicity. Frequency-specific microcurrent therapy works by increasing blood flow to the kidneys and flushing out toxins from the system that could cause inflammation and infection. This helps to reduce the risk of developing painful kidney stones in the future.
Asthma
One of the ways it works is by increasing blood flow to inflamed muscles, which allows them to relax and ease breathing. This means frequent microcurrent treatments can help patients breathe more easily throughout the day without having to rely on medication – or even during attacks when they may not have access to it.
The therapy also helps increase oxygen levels in the body, which not only relieves asthma symptoms but also helps prevent future flare-ups by keeping airways open and healthy. It’s estimated that frequency-specific microcurrent therapy can help stop up to 77 percent of asthma attacks before they even start.
Wounds
Treating a wound is not just about closing up the skin. It is about eliminating the source of infection and stimulating the body to rebuild the injured area. This can only be accomplished with frequency-specific microcurrent therapy treatments that have been proven to eliminate infections as well as stimulate cell growth in
damaged areas. The stimulation produces new cells and collagen, which hastens the healing process while reducing scarring.
Concussions
This therapy is used to treat the symptoms of concussion, such as memory loss and confusion, and it’s effective when used in conjunction with other concussion treatments.
Microcurrent therapy uses a small amount of electrical current to stimulate the body’s natural healing response. The current passes through the electrodes placed on the head and sends signals to nerve cells in the brain. These signals can activate specific areas of the brain that control memory, reasoning, and emotional responses. As a result, patients have fewer symptoms associated with concussions.
Arthritis
The most common symptom of arthritis is pain and stiffness in the joints. It can interfere with everyday life, making it difficult to get dressed, work, or even walk. Some people may also experience redness, heat, and swelling around the affected joint. People with arthritis may also experience muscle weakness in their arms, legs, and back.
The symptoms of this disease can be debilitating and affect your quality of life. If you are suffering from arthritis pain, frequency-specific microcurrent therapy may help you reduce inflammation and relieve your pain symptoms.
What are the risks of having frequency-specific microcurrent therapy?
While this therapy can be effective with little or no pain, it does have some risks involved. Some side effects can include redness, swelling, or tenderness at the site of treatment. In rare cases, an infection may occur. Other rare side effects include blisters or swelling due to inflammation of blood vessels or allergic reactions.
Because of the possible side effects and risks, it is important to make sure you are getting frequency-specific microcurrent therapy from a trained professional.
Frequency-specific microcurrent therapy near me: How to find the best services
It may be difficult to find a frequency-specific microcurrent practitioner near you. This is because frequency specific microcurrent therapy is not very popular, in spite of its effectiveness.
This is why you don’t have to book the first appointment you see! You want to make sure you’re choosing a frequency-specific microcurrent practitioner that’s right for you.
There are several things you need to know before choosing a practitioner, including:
1. Are they familiar with your specific condition? It is important to find a practitioner who is familiar with your specific condition in order to determine if you will be a good candidate for frequency-specific microcurrent therapy and what your treatment course should be.
2. Are they trained in treating the specific condition you have? You should consider the credentials and experience of the practitioner before you commit to undergoing frequency-specific microcurrent therapy. Some practitioners are also trained in other modalities and can combine frequency-specific microcurrent therapy with other therapies to achieve optimal results.
3. Do they follow current clinical guidelines for treatment and diagnosis? Choosing a microcurrent therapy practitioner is an important decision. It is important to know whether the practitioner does follow current clinical guidelines for treatment and diagnosis. Here are some questions you can ask your practitioner before making a decision about which one to choose:
4. What is their clinical background and experience with other therapeutic modalities, such as nutrition, meditation, physical therapy, herbal medicine, and so on?
5. Are they willing to work together with you in committing to your healing program in addition to recommending other therapies or treatments?
6. How long have they been using frequency-specific microcurrent therapy? Have they had formal training and been certified by a recognized frequency-specific microcurrent therapy organization or educational institution?
7. What percentage of their practice uses frequency-specific microcurrent therapy compared to other methods or treatments? If their method relies heavily on medication, it might not be the best choice for you.
Conclusion
Having looked at frequency-specific microcurrent therapy in more detail, we now hope that you are in a better position to understand the potential benefits of this treatment method. We would like to see more clinical trials being conducted to explore the efficacy of frequency-specific microcurrent therapy, but as it stands there is at least some evidence of effectiveness. This is likely to be an area of continued growth in complementary health care, so keep our guide bookmarked for future updates on this topic.
